Titan TS142 Quick Install Manual

Titan TS142 Quick Install Manual

For cars/advanced led 2-way remote car starter advanced led 2-way remote car starter for automatic & manual transmission vehicles

Advertisement

Advanced LED 2-Way
Advanced LED 2-Way
Remote Car Starter
Remote Car Starter
For Automatic
For Automatic
& Manual Transmission
& Manual Transmission
Vehicles
Vehicles
www.titaninnovations.ca
www.titaninnovations.ca
Revision 2.01
Revision 2.01

Advertisement

Table of Contents
loading

Summary of Contents for Titan TS142

  • Page 1 Quick Install Guide Advanced LED 2-Way Advanced LED 2-Way Remote Car Starter Remote Car Starter For Automatic For Automatic & Manual Transmission & Manual Transmission Vehicles Vehicles Revision 2.01 Revision 2.01 www.titaninnovations.ca www.titaninnovations.ca...
  • Page 2 TS142 Quick Install Guide Transmitter Operation T85RC (LED 2-Way) Remote) & T85SRC (Companion Action Operation Locks doors and Arms Titan-Secure (If Alarm Press Button 1 Once features are turned on in Menu M2-3) Press and Hold Button 1 for 2 Remote Panic Seconds...
  • Page 3 To disable valet mode: turn ignition ON. Within 10 seconds press and hold the valet switch for 5 seconds. LED will turn OFF, siren/horn will chirp and parking lights will flash twice to indicate exiting valet mode. Version 2.01 TS132/TS142/TS152 QIG...
  • Page 4 2. Once the correct Sub-Menu has been selected, press and hold the Program Button until the park lights flash and the siren/horn chirps to confirm the desired setting. For example: 1 park light flash and 1 chirp= Setting 1; 2 park light flashes and 2 chirps= Setting 2; 3 Version 2.01 TS132/TS142/TS152 QIG...
  • Page 5 Park Lights On for Park Light M2-2 (-) Park light (+) Park light* 30 Seconds After Output Unlock Titan-Secure Alarm Features Alarm Features M2-3 Alarm Features OFF* Normal M2-4 Rearm Output Type 1 Type 2 Type 3 Rearm* Version 2.01 TS132/TS142/TS152 QIG...
  • Page 6 MENU 4 (Button 4) 1 flash 2 flash 3 flash Re-arm Auxiliary Outputs LONG Auxiliary on Dis-arm (Blue & Auxiliary on Auxiliary Pulse M4-1 Outputs WITHOUT Green/Black WITH Unlock (3.5 Seconds) Unlock wires) WITH Unlock Default* Version 2.01 TS132/TS142/TS152 QIG...
  • Page 7 Door Unlock and Lock Pulses will be 3 seconds long. M1-3-3 Flashes Door Unlock pulse will be ¼ second and Door LOCK pulse will be 8 seconds long. M1-3-4 Flashes Door Unlock and Lock Pulses will be ¾ seconds long. Version 2.01 TS132/TS142/TS152 QIG...
  • Page 8 Setting if using a Fortin module connected to Data Port EXPLANATION AFETY START M2-1-1 Flash Press Start button 2X within 3 seconds to activate remote start. M2-1-2 Flashes Press Start Button 1X to activate remote start. Version 2.01 TS132/TS142/TS152 QIG...
  • Page 9 No special functions with regard to Park light and Trunk Outputs. AR ALARM FEATURES M2-3-1 Flash Titan Secure Alarm Features ON (Active or Passive arming and locking controlled by M2-7) M2-3-2 Flashes Titan-Secure Alarm Features OFF (Default): Turns off all car alarm security features.
  • Page 10 T96A. CTIVE PASSIVE ARM TITAN SECURE FEATURES ON ONLY M2-7-1 Flash Passive Titan-Secure features and Starter disable will arm Passively (See notes below). M2-7-2 Flashes Active Titan-Secure features & Starter Disable will arm only with the transmitter (Lock/Arm & Unlock/DisArm).
  • Page 11 Remote starter will sense by altering tach pulse frequency. M3-4-3 Flashes Remote starter will detect 2 cycle pulses. EADY ETUP ANUAL RANSMISSION M3-5-1 Flash Foot & ParkBrake. M3-5-2 Flashes Park Brake Only. M3-5-3 Flashes Transmitter Only. Version 2.01 TS132/TS142/TS152 QIG...
  • Page 12 .75 second output pulse from the Blue Re-arm wire. Press and hold button 4 for 2 seconds, there will be an Unlock pulse followed by a .75 second output pulse from the Green / Black Dis- arm wire. Version 2.01 TS132/TS142/TS152 QIG...
  • Page 13 M4-3-3 Flash Red / White Trunk release output operates with a 3.5 second output. M4-3-4 Flash Red / White Trunk release output operates with a .75 second output Version 2.01 TS132/TS142/TS152 QIG...
  • Page 14 If the remote starter is to be used in an automatic transmission vehicle, you must cut the loop for normal operation. If the loop is not cut, Version 2.01 TS132/TS142/TS152 QIG...
  • Page 15 Titan Innovations and we would be happy to EXCHANGE the unit for you free of charge for a new unit with the loop intact and not tampered with.
  • Page 16 *** If you press the Start button on the transmitter while the door is open, the system will go programmed run time or until it is shut down by the remote. This feature is convenient if you need to open other doors after having closed yours. *** Version 2.01 TS132/TS142/TS152 QIG...
  • Page 17 Parking light flashes Reason 3 slow flashes In Service Mode 4 flashes (Manual Transmission Only) 5 slow flashes Ignition on 5 flashes Brake pedal is on 6 flashes Hood Open 7 times Tach lockout or Tach not learned Version 2.01 TS132/TS142/TS152 QIG...
  • Page 19 DATA PORT CONNECTOR Note: The GRAY/BLACK wire is a dual-purpose wire. If the remote starter is inactive this wire can function as an “instant trigger to start” wire. If the remote starter is running, this wire will also work as a shutdown wire. If the ignition is on, but the engine is not yet running (no tach signal), this wire acts as a “wait to start”...
  • Page 20 Quick Install Guide Quick Install Guide Revision 2.01 Revision 2.01 www.titaninnovations.ca www.titaninnovations.ca...

Table of Contents