Titan TS 141A Installation Manual page 16

INSTALLATION MANUAL
Menu 2- Additional Settings
M2–1 Safety Start
1. Safety On – Press the start button twice with 3 seconds to remote start
2. Saftety Off – Press the start button once to rem ote start vehicle
M2–2 Parking Light/Trunk Output
1. 30 Seconds – Parking lights stay on for 30 seconds when doors unlocked
2. Negative Parking Lights – Switches the Park Light/Trunk outputs
3. Default On All Outputs
M2-3 Trunk Release on (#) Button
1. (#) Button activates Trunk Release (Hold down for 3 seconds)
2. (#) Button activates Car Finder Mode
M2-4 Re-Arm Output
1. Type 1 – Pulse after start and with lock
2. Type 2 – Pulse after start only
3. Factory Alarm Re-Arm – Pulse with lock and after rem ote starter
shutdown
M2-5 Starter Disable/GW R
1. Active – (-) When locked and during remote start (Anti-Grind)
2. Passive – (-) When locked or 30 sec. after ignition OFF and with remote
start
3. GW R – (-) Output during rem ote start only
M2-6 Secure Valet Mode (tim e required to set VALET m ode)
1. Secure Valet – Hold the VALET button for 15 seconds
2. Norm al Valet – Hold the VALET button for 5 seconds
TS141A REMOTE STARTER
****Bold text indicates default settings****