Titan TS 141A Installation Manual page 5

GRAY/BLACK - WAIT TO START (-) / (-) TRIGGER TO START (INSTANT START WIRE)
Note:
The GRAY/BLACK wire is a
dual-purpose wire. If the remote starter
is inactive this wire acts as an "instant
trigger to start" wire. If the remote
starter is running, this wire will also
work as a shutdown wire. If the ignition
is on, but the engine is not yet running
(no tach signal), this wire acts as a "wait
to start" wire that hooks up to a glow
plug or manifold heater wire. You can
hook this wire up to perform dual
functions provided you diode-isolate
the "wait to start" and "instant start"
wires. For diesel vehicles you can also
just program a delay to start "wait time"
as in Menu 3 programming settings
(M3-1). The instant wire is active as
such regardless of what diesel
programming is set for in Menu M3-1.
Call tech support if you need details on
other input.
the function of this or any
Toll Free at 1-888-852-5703