Titan TS 141A Installation Manual page 7

TS141A REMOTE STARTER
Wiring Side Connectors
*The center pin of the keyless entry harness is ONLY available with plug-in
devices such as the INV200US, PDLM3, or PDLMRUS.
Overloading this output will damage the remote starter.
Door Lock Output (-)250ma
12v Output (+)250ma
Door Unlock Output (-)250ma
ACTIVE RF ANTENNA**
Status Led's
**The antenna MUST be connected for the system to operate
Ground While Running Output (-)250ma
Ground Output (-)250ma
12Volt Output (+)250ma
Output on Pink White Jumper position
Second Starter
Second Accessory
Second Ignition
NOTE: The jumpers control the output from the PINK/WHITE wire on
the main 6- pin harness. This is an 30amp relayed output.
*The factory default setting of the Selectable Output jumper is position #3.
(see notes)
Program Button
Position 1
Position 2
Position 3
INSTALLATION MANUAL
GREEN
RED*
BLUE
WHITE/VIOLET
BLACK
RED
1 2 3
1
2
3
1
2
3
4
1
2
3
Jumpers