Changing Cost Per Ticket - Jet SPACE BALLZ Service Manual

PROGRAM SETUP INFORMATION
Step # 16
Changing the cost per ticket
To change the cost per ticket - from the "COST PER CREDIT /
TICKET" page, push "ENTER" this will delete the value in the
"COST PER CREDIT" section. You will have to re-enter the
proper value and push "ENTER". You will then be able to
enter the "COST PER TICKET" value. This value should be
whatever your individual ticket cost is per ticket. For
example: 0.005 for half of a US Penney or 0.01 for 1 US
Penney. Be sure to include the decimal. After entering the
proper value - push the "ENTER" button to exit the select
mode.
Step # 17
Changing the amount of credits required per play
To change the number of credit required to begin the game,
select the "CREDITS" page. Push the "ENTER" button and
enter what ever value you want. After the proper value has
been entered, push the "ENTER" button to save. Note that if
you enter "O" - the game will run in FREEPLAY. If you are
using a card system - set the credit value to "1" . You will
need to change your cost per credit in order to get the
proper payout displayed in the audit page. Games shipped to
New Jersey will be limited to a maximum of either $1.00 or
$2.00 Game Play. New Jersey software is limited by the
following selection: Selecting 1-4 credits will only allow 4
coins to enter the game for one game play. Selecting 5-20
credits will only allow 8 coins to enter the game for one game
play.
Step # 18
Setting the proper currency
Space Ballz has been designed so that the software can be
used in foreign Countries and still display the proper values
in the audit page. From this page, select your currency from
the list. Note: Please use "US DOLLAR" unless you have
contacted JET and received a different software version for
your Country.
Jennison Entertainment Technologies Space Ballz Service Manual Page 42