Jet SPACE BALLZ Service Manual page 17

Step # 5-E
Lifting section # 3 into place
At the same time - each person should carefully climb either the step
stool or the ladder until they have reached a height where the bolts
can be guided into the mounting holes. Make sure you have a proper
grip before ascending the ladder and never stand under the weight.
SECTION # 3 WEIGHS APPROX. 150 POUNDS. THE
TWO PEOPLE WHO WILL INSTALL THIS SHOULD BE
ABLE TO LIFT THAT AMOUNT OF WEIGHT ABOVE
THEIR HEADS FOR AN EXTENDED PERIOD OF TIME. IF
TWO PEOPLE CANNOT SAFELY LIFT THE SECTION -
SEEK ADDITIONAL ADULT HELP BEFORE INSTALLING
Step # 5-F
Lifting section # 3 into place - Cont.
1) After getting the unit above the main cabinet - adjust your hold on
the unit as needed. Do not let go of the unit. If you must set it down
for any reason - make sure it is resting on the four bolts and not the
acrylic glass. Do not allow it to sit on these bolts for an extended
period of time.
2) Check to make sure that the wire harness is plugged into the LED
connector on the left and right. Do not let go of the unit to adjust
this.
DO NOT ALLOW THE ACRYLIC TO TAKE ANY WEIGHT
OF THE UPPER SECTION. IT CANNOT TAKE THE
WEIGHT AND WILL BREAK.
Step # 5-G
Lifting section # 3 into place - Cont.
If you must rest for any reason. Make sure the unit is resting on the
four bolts. Check to make sure none of the bolts are either close to
the mounting holes or close to the edge of the game.
were not designed to hold weight in this manner - do not keep the
unit in this position for an extended period to time and do not
release you grip on the top at any point!
DO NOT ALLOW THE ACRYLIC TO TAKE ANY WEIGHT
OF THE UPPER SECTION. IT CANNOT TAKE THE
WEIGHT AND WILL BREAK.
Jennison Entertainment Technologies
INSTALLATION INSTRUCTIONS
DANGER
ONTO THE GAME!
CAUTION
CAUTION
Space Ballz Service Manual
Check Box When This Step is Complete
Check Box When This Step is Complete
These bolts
Check Box When This Step is Complete
1
2
Page 17