Jet SPACE BALLZ Service Manual page 29

Step # 9
Pull the wires out of the control panel
Pull the wires out of the control panel and inspect each connector.
Ensure that all pins are properly seated in the connectors.
Step # 9-A
Pull wires out of the main cabinet
Pull the wires out of the main cabinet and check that the pins in each
of the connectors are properly seated.
Step # 9-B
Attach the wires from the control panel to the main cabinet
Attach the wires from the main cabinet (Section # 2) (If Applicable) to
the wires in Section # 1. Each connector is marked or numbered to
the corresponding connector.
Jennison Entertainment Technologies
INSTALLATION INSTRUCTIONS
Space Ballz Service Manual
Check Box When This Step is Complete
Check Box When This Step is Complete
Check Box When This Step is Complete
Page 29