Jet SPACE BALLZ Service Manual page 13

Step # 2
Remove and open the upper sections
Remove and separate the two crates. Remove the wooden tops (If
Applicable). Be careful when using a hammer to open the crate -
there are sensitive electronic components and glass pieces within
each crate.
PACKAGING AND PALLET MAY BE DIFFERENT THAN
Step # 2-A
Opening the upper section crates
Remove the support bars (If Applicable) and then carefully remove
any top packaging. Remove enough of the packaging to access the
metal cross bars.
PACKAGING AND PALLET MAY BE DIFFERENT THAN
Step # 2-B
Removing section # 3 from the crate properly
Lift Section # 3 out of the wooden crate by lifting on the metal
support bars as seen in the photo to the right.
BEFORE PROCEDING.
2 PEOPLE REQUIRED - 150 POUNDS
Jennison Entertainment Technologies
INSTALLATION INSTRUCTIONS
NOTICE
SEEN IN PHOTO
NOTICE
SEEN IN PHOTO
PLEASE SEE STEP # 2-C
WARNING
Space Ballz Service Manual
Check Box When This Step is Complete
Check Box When This Step is Complete
Check Box When This Step is Complete
Page 13