Jet SPACE BALLZ Service Manual page 24

Step # 6-J
Securing Section # 4 to Section # 3
1) As you can see in the photo to the right - the support tab fits
securely into the receiving hole and the bolts on Section # 3 fit right
through the receiving holes on Section # 4.
2) Use the provided nuts, washers, and lock washers to secure each
of the four bolts. Use the provided tool to tighten all nuts.
Step # 7
Connecting Electrical Connectors
Open the rear access door and look up and to the left. Just above the
access hole - you will see two wire connections that must be plugged
in. Take each wire and push it down through the hole in the rear of
the cabinet.
Step # 7-A
Connecting Electrical Connectors
After pushing both connectors through the rear hole - plug each one
into the corresponding connectors.
Jennison Entertainment Technologies
INSTALLATION INSTRUCTIONS
Space Ballz Service Manual
1
2
Check Box When This Step is Complete
Check Box When This Step is Complete
Check Box When This Step is Complete
Page 24