Jet SPACE BALLZ Service Manual page 28

Step # 7-K
Connecting Upper Left Cabinet Wires - Section # 4
1) Connect the monitor VGA Cable. Note: In some units - this cable
might be a HDMI cable.
2) Connect the 110 Volt (OR) 220 Volt three pin LED Light harness.
3) Connect the two pin left and right speaker connectors.
Step # 7-L
Connecting the Speaker Cables
Insert the two pin Molex connector(s) in the left and right speakers
on the acrylic marquee.
USE TWO PEOPLE TO ATTACH THE ACRYLIC
Step # 8
Secure the Acrylic Marquee to the Cabinet
Use the screws you took out of the marquee earlier and replace
them into the holes securing the acrylic to the cabinet
USE TWO PEOPLE TO ATTACH THE ACRYLIC
Jennison Entertainment Technologies
INSTALLATION INSTRUCTIONS
WARNING
MARQUEE
WARNING
MARQUEE
Space Ballz Service Manual
1
3
Check Box When This Step is Complete
Check Box When This Step is Complete
Check Box When This Step is Complete
2
Page 28