Table of Contents
Advertisement
Kongsberg Simrad EM 300
Note
56
Base version
2
Press and hold the middle mouse button, and move the
mouse sideways. The view in the window is shifted
accordingly.
To redraw
This function was implemented to make the graphical software run
on slower workstations, and allows you to redraw the display if the
display interval has been reduced. This is however not
recommended.
1
Select View -> Redraw.
To select data to be shown behind the vessel
symbol
This function is intended for realtime use only.
1
Select View -> Data choice.
2
Select information types.
The Data choice function is described on page 211.
→
Ping Display
The Ping Display presents a real-time view of the system
performance during on-line operation. The display shows the raw
data from the system after corrections have been applied for vessel
attitude and sound speed. The Ping Display starts automatically
when the echo sounder is started.
The Ping Display is described on page 162.
→
If you have accidentally stopped the utility during the session, you
can restart the Ping Display from the icon on the EM 300
Launchpad.
Additional operational procedures for the Ping Display are found on
→
page 169.
To start the Survey Display utilities
The Survey Display hosts several additional utilities. These may
be started from the Processing menu. Each utility is briefly
explained in this chapter, while references are made to further
operational procedures.
Some of the utilities are designed to be used only during on-line
operations!
Grid Display
The Grid Display displays all depths and related data for a
specified geographical area. The logged data for this area is then
displayed in a dedicated window.
160719
/F
Advertisement
Table of Contents
