Communication Settings - LG LKD1000 Owner's Manual

3. Adjust the pan, tilt, and zoom position so that the
desired position comes into the zone frame with
the joystick.
4. Use number buttons to select the zone index
number then press ENTER to confirm.
The grey zone frame appears on the center of
monitor.
5. Repeat the steps 2-4 to add additional position.
To display or disappear privacy zone
1. Select the [PRIVACY ZONE] icon and press
ENTER.
The sub menu will appear.
PRIVACY ZONE
M1
2. Select [Display Zone Area] option then press
ENTER.
The sub menu will appear.
SET ZONE AREA /DVR1/CAM1
Set Zone Area
DISPLAY ZONE AREA /DVR1/CAM1
Display Zone Area
Set Zone Area
Display Zone Area
SET ZONE AREA /DVR1/CAM1
[Set Privacy Zone]
DISPLAY ZONE AREA /DVR1/CAM1
Zone No : _
(1~8) Display : OFF (4:ON 6:OFF)
Zone No :
(1~8)
3. Use 4 (ON) or 6 (OFF) number buttons to select
Display Mode then press ENTER.
• ON: The veiling function does not work.
• OFF: Preset privacy zones are veiled on the
monitor screen.
4. Enter a [Zone No] number (1-8).
5. Repeat steps 3-4 to set additional zone.

Communication Settings

This setting is required to establish a connection
between the system units and system controller.
Select the [COMMUNICATION] icon and press
ENTER.
/DVR1/CAM1
Protocol Setting
This item lets you set a protocol for RS-485 commu-
nication.
1. Select [Protocol] option then press ENTER.
2. Select the desired parameter from [LG Multix],
NUM
3. Press ENTER to save the settings.
The display zone setting has been completed
and the setting is memorized in the camera's
memory.
COMMUNICATION
PROTOCOL
COMMUNICATION
Protocol (No Protocol)
Baudrate (9600)
Parity Bit (NONE)
DISPLAY ZONE AREA /DVR1/CAM1
Set Zone Area
BAUDRATE
The sub menu will appear. Display Zone Area
PROTOCOL
Protocol (No Protocol)
Baudrate (9600)
Protocol (No Protocol)
Parity Bit (NONE)
Baudrate (9600)
Parity Bit (NONE)
DISPLAY ZONE AREA /DVR1/CAM1
Display : OFF (4:ON 6:OFF)
PARITY BIT
Zone No :
BAUDRATE
Protocol (No Protocol)
(1~8)
Baudrate (9600)
Protocol (No Protocol)
[LG old], [Pelco P], [Pelco D] and [LG Zoom
Parity Bit (NONE)
Baudrate (9600)
Cameras].
Parity Bit (NONE)
PARITY BIT
Protocol (No Protocol)
Baudrate (9600)
Parity Bit (NONE)
/DVR1/CAM1
/DVR1/CAM1
/DVR1/CAM1
/DVR1/CAM1
/DVR1/CAM1
/DVR1/CAM1
/DVR1/CAM1
NUM
/DVR1/CAM1

DATA
Data Bit (
Stop Bit (
Speed (12
STO
DATA
Data Bit (
Stop Bit (
Data Bit (
Speed (12
Stop Bit (
Speed (12
MOV
STO
Data Bit (
Stop Bit (
Data Bit (
Speed (12
Stop Bit (
Speed (12
SYN
MOV
Sync Com
Data Bit (
Stop Bit (
Speed (12
SYN
Sync Com