Table of Contents
Advertisement
Please Enter DVR ID
Target DVR ID : _
Camera Setup Menu
DVR KEY EMULATION /DVR1
The Camera Setup menu has several sub-
menus: System Setup, Preset Data Load, and
Communication. All of these main menus are divided
into submenus.
Camera setup menu overview
Main Menu
Sub Menu
Page
/DVR1/CAM
Set Preset
15
Go to Preset
16
Tour
16
Edit Group
17
PRESET
Group Tour
18
Clear Preset
18
Clear All Preset
19
Please Enter DVR/CAM ID
Set Alarm Input
19
Target DVR/CAM ID : _
Set Alarm Output
20
Set Auto Panning
20
AUTO PANNING
Run Auto Panning
21
Record Pattern
21
PATTERN
Play Pattern
22
Set Zone Area
22
PRIVACY ZONE
Display Zone Area
23
Protocol
23
Baudrate
24
Parity Bit
24
COMMUNICATION
Data Bit
24
Stop Bit
24
Speed
24
Sync Communication
25
Manual Focus Speed
25
PTZ Home Position
25
CAMERA SETTING
PTZ Position Reset
26
Remote PTZ Reset
26
Factory Default
26
Note:
The pictures used in the camera setup menu are
based on DVR-camera menu.
Preset Settings
DVR KEY EMULATION /DVR1
Preset position is the function to register camera
INPUT KEY :
monitoring positions (preset positions) associated
with position numbers.
By entering the position numbers, you can move
cameras to the preset positions.
Note:
To activate this function, you need to register the
preset positions of combination camera.
To register preset positions
1. Select the [PRESET] icon and press ENTER.
The sub menu will appear.
PRESET
/DVR1/CAM1
2. Select [Set Preset] option then press ENTER.
The sub menu will appear.
SET PRESET
/DVR1/CAM1
EDIT G
Set Preset
Edit Group
Go to Preset
Group Tou
Tour
Clear Pres
SET PRESET
/DVR1/CAM1
SELEC
Number (0~127)
: _
[SELECT G
Speed (0~127)
:
Park Time(1~255) :
3. By moving the joystick, move the camera to a
point you want.
4. Enter a [Number] number (0-127) you wnat to
GO TO PRESET
/DVR1/CAM1
EDIT G
register by pressing the numeric buttons then
Set Preset
press ENTER.
Presets :
Go to Preset
5. Enter a [Speed] (0-127) to move to the preset
Add Pre
Tour
position. Then press ENTER.
Del Pres
6. Enter a [Park Time] (holding time) (1-255). Then
press ENTER.
The position and its number are memorized for
GO TO PRESET
/DVR1/CAM1
later recall.
7. Repeat steps 3-6 to add additional position.
[Go To]
8. Press CLR to return to the previous menu.
Preset # :
(0~127)
Grou
select gr
15
TOUR
/DVR1/CAM1
Set Preset
Go to Preset
Tour
CLEAR
Hide quick links:
Advertisement
Table of Contents
