Communication Settings - LG LKD1000 Owner's Manual

To display or disappear privacy zone
1. Select the [PRIVACY ZONE] icon and press
ENTER.
The sub menu will appear.
2. Select [Display Zone Area] option then press
ENTER.
The sub menu will appear.
3. Use 4 (ON) or 6 (OFF) number buttons to select
Mask Mode then press ENTER.
• ON: Preset privacy zones are veiled on the
monitor screen.
• OFF: The veiling function is disabled.
4. Enter a [Zone No] number (1 to 8).
The display zone setting has been completed and
the setting is memorized in the camera's memory.
5. Repeat steps 3 to 4 to set additional zone.
6

Communication Settings

This setting is required to establish a connection be-
tween the system units and system controller.
Protocol Setting
This item lets you set a protocol for RS-485 commu-
nication.
1. Select the [COMMUNICATION] icon and press
ENTER.
2. Select [Protocol] option then press ENTER.
The sub menu will appear.
3. Select the desired parameter from [LG Multix],
[LG SD168], [Pelco D], [Pelco P], [LG Zoom].
[LPT A100L], [LG Multix Extensiton] and [LS900].
4. Press ENTER to save the settings.