Table of Contents
Advertisement
(0~127)
CLEAR ALL PRESET /DVR1/CAM1
Clear All Preset
Set Alarm Input
Set Alarm Output
To set Alarm Output
You can set alarm output mode, alarm index, and
duration time. When alarm inputs are supplied via
CLEAR ALL PRESET /DVR1/CAM1
DVR KEY EMULATION /DVR1
/DVR1
the alarm input connector on the camera, the cam-
[Clear All Preset]
era sends output signals via the alarm output con-
INPUT KEY :
Are you sure?
nector on the camera.
Alarm output numbers 1 to 4 are linked to alarm
1
inputs 1 to 4 respectively. If alarm input 1 comes in,
the camera sends output signals via the alarm
output 1 connector on the camera.
(This operating description is based on the LG prod-
VR1/CAM
SET ALARM INPUT
/DVR1/CAM1
uct.)
Clear All Preset
Note:
Set Alarm Input
M1
You cannot use this function with a camera without
Set Alarm Output
alarm output connector.
1. Select the [PRESET] icon and press ENTER.
The sub menu will appear.
SET ALARM INPUT
/DVR1/CAM1
PRESET
/DVR1/CAM1
Alarm Input : OFF ( 4 : ON
6 : OFF )
Alarm Index :
Duration Time :
M1
2. Select [Set Alarm Output] option then press
ENTER. The sub menu will appear.
SET ALARM OUTPUT /DVR1/CAM1
Clear All Preset
Set Alarm Input
Set Alarm Output
1
SET ALARM OUTPUT /DVR1/CAM1
Alarm Output : OFF ( 4 : ON
6 : OFF )
Alarm Index
:
Duration Time :
3. Use 4 (ON) or 6 (OFF) number buttons to select
Alarm Output Mode then press ENTER.
•
ON: If alarm input comes in, the camera
sends output signals.
•
OFF: The camera does not send an output
signal.
4. Enter a [Alarm Index] number (1-4) then press
ENTER.
0
5. Enter a [Duration Time] (0-255) then press
ENTER.
Sends the output signals for the selected dura-
/DVR1
tion. (0 (Manual mode); the camera sends output
signals continuously.)
Alarm output setting is finished and the setting is
memorized to the camera’s memory.
1
6. Repeat steps 3-5 to set additional Alarm Output.
Auto Pan Setup and Activation
M1
You will set up and activate the auto pan function.
The camera can pan among the points you will set.
Note:
Refer to the operating instructions of camera for
details on the auto pan function.
To set the points of auto pan
1. Select the [AUTO_PANNING] icon and press
ENTER.
M1
The sub menu will appear.
AUTO_PANNING
/DVR1/CAM1
AUTO_PANNING
/DVR1/CAM1
2. Select [Set Auto Panning] option then press
ENTER.
SET AUTO PANNING /DVR1/CAM1
The sub menu will appear.
Set Auto Panning
SET AUTO PANNING /DVR1/CAM1
Run Auto Panning
Set Auto Panning
Run Auto Panning
SET AUTO PANNING /DVR1/CAM1
Auto-Pan No.#
: _
SET AUTO PANNING /DVR1/CAM1
Speed (0~127)
:
Auto-Pan No.#
: _
Park Time(1~255) :
Speed (0~127)
:
Park Time(1~255) :
Hide quick links:
Advertisement
Table of Contents
