Table of Contents
Advertisement
Chapter 2 Preparations
11. Use the four screws you removed in step 3 to fix
the 2.5-inch HDD cage.
This completes the replacement procedures for HDD cages.
1.12.2 Installation
Follow the procedure below to install the 2.5-inch Hard Disk Drive.
1.
Refer to the manual provided with the Hard Disk Drive before installation, and specify the settings of
the Hard Disk Drive.
Number of
additional drives
1
2
3
4
2.
Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
3.
Remove the side cover while referring to Chapter 2 (1.4 Removing the Side Cover).
4.
Remove the power cable on the motherboard.
5.
If the Hard Disk Drive is already installed, remove the interface cable and power cable connected to
the Hard Disk Drive.
78
Location of the bay where the drives
will be installed
The first level from the bottom
The second level from the bottom
The third level from the bottom
The fourth level from the bottom
Express5800/GT110d User's Guide
1. Installing Internal Optional Devices
Serial ATA connector of the connecting
motherboard
Serial ATA connector 0
Serial ATA connector 1
Serial ATA connector 2
Serial ATA connector 3
Serial ATA
connector 0
Serial ATA
connector 1
Serial ATA
connector 2
Serial ATA
connector 3
Advertisement
Table of Contents
