Network Setup; Sd Card Setup; Setting Up The Security Function; Password Setting, Change - Panasonic PT-L735E Operating Instructions Manual

Network setup

(PT-L735NTE only)
You need make adjustment on some items when controlling the projector
with a personal computer by means of the wireless network. Refer to the
accessory CD-ROM for details.
調整：［←］［→］
NETWORK
Network settings can be selected
and you can then make further
settings.
EASY CONNECT
This item is for setting whether the
EASY CONNECT function is used
or not.
HOSTNAME
The host name for this projector can
be set.

SD card setup

(PT-L735NTE only)
The following settings are used when projecting the pictures recorded in the
SD memory card. Refer to the accessory CD-ROM for details.
48-E
NGLISH
WEB CONTROL
To control the projector with a personal
computer by means of the wireless
network, set the WEB CONTROL to
"ON". To prevent it, set to "OFF".
WEB STANDBY
To turn on and off the power with a
personal computer by means of the
wireless network, set the WEB
STANDBY to "ON".
When the WEB STANDBY is set to
"ON", the cooling fan operates and
the power indicator on the projector
flashes slowly in red.
WEB PASSWORD
You can set the password for
controlling the projector with a
personal computer by means of the
wireless network.
SD MODE
The playback methods can be set
when SD CARD is selected.
AUTO PLAY
Plays the pictures recorded in the
SD memory card automatically.
REPEAT
This setting is for adjusting the
times of the auto play.
INTERVAL
This setting is adjusting the interval
of the auto play.

Setting up the SECURITY function

This projector is equipped with a security function. A password input screen
can be displayed, or a company URL can be set up and displayed at the
bottom of the projected image. A logo also can be displayed before projection.
Use the I and H buttons on the
projector or remote control unit to
select SECURITY, then press the G
button.
(When you use the SECURITY
function for the first time)
Press the F, H, G, I, F, H, G
and I buttons in order, then press
the ENTER button.
(When a password change has
been made before)
Type in the changed password, then
press the ENTER button.
PASSWORD SETTING
The password input screen can be
displayed when the power is turned
on. All of the controls other than the
POWER button are disabled unless
the password is entered correctly.
VALID
PASSWORD SETTING is enabled.
INVALID
PASSWORD SETTING is disabled.
The password input screen will not be
displayed when the power is turned on.
CHANGE PASSWORD
Passwords can be changed.Press
the ENTER button to display the
CHANGE PASSWORD screen.
# Set a password by pressing the
F,G,I, and H buttons on the
remote control unit. (A maximum
of 8 buttons can be set.)
$ Press the ENTER button.
% Enter the password again for
confirmation.
& Press the ENTER button.
(Password change will be
completed.)
E -49
NGLISH