Connections; Example Of Connecting To Video - Panasonic PT-L735E Operating Instructions Manual

Commercial use
Hide thumbs Also See for PT-L735E:
Table of Contents

Advertisement

Connections

Notes on connections
B Read the instruction manual for each system component carefully before connecting it.
B Turn off the power supply for all components before making any connections.
B If the cables necessary for connecting a component to the system are not included with the component
or available as an option, you may need to fashion a cable to suit the component concerned.
B If there is a lot of jitter in the video signal which is input from the video source, the picture on the
screen may flicker. In such cases, it will be necessary to connect a TBC (time base corrector).
B Refer to the list on page 62 for details on compatible signals which can be input to the projector.
B Only one audio system circuit is available for each of the AUDIO IN L-R jacks for
S-VIDEO/VIDEO signals and the RGB AUDIO IN jack, so if you wish to change
the audio input source, you will need to remove and insert the appropriate plugs.
Example of connecting to video equipments
D-sub 15 (male) - BNC5 (male)
Computer for
adapter cable
control use
Red (connect to P
Blue (connect to P
Green (connect to Y signal connector)
D-sub 9-pin
(male)
Audio system
NOTE:
B If the video signal source is connected using a cable with a BNC connector plug, use a
BNC/RCA adapter (sold separately) to convert the cable end to an RCA plug-type jack.
B If the signal cables are disconnected or if the power supply for the
computer or video deck is turned off while the digital zoom function is
being used, this function will be cancelled.
20E
NGLISH
signal connector)
R
signal connector)
B
DVD player
DVD player
Video deck
Example of connecting to computer
Monitor
Computer for
control use
D-sub 9-pin
(male)
NOTE:
B It is better to shut down the computer before turning off the MAIN
POWER switch of the projector.
B Do not input the signal to the RGB2 IN/RGB1 OUT connector when the
RGB2 SELECT item in the OPTION menu is set to "OUTPUT". (Refer
to page 45.)
Refer to the accessory CD-ROM for details on the wireless network
that is used for controlling the projector with a personal computer
by means of the wireless card. (PT-L735NTE only)
Computer
ON
DIP
2
1
4
3
5
6
Audio system
E
-21
NGLISH

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-l735nte

Table of Contents