Table Of Contents; Precautions With Regard To Safety - Panasonic PT-L735E Operating Instructions Manual

Contents
Preparation
IMPORTANT SAFETY NOTICE ...2
Precautions with regard to
safety .........................................5
Accessories .................................9
Before use ..................................10
Location and function of each
part...........................................12
Inserting the wireless card .......17
Getting started
Setting-up...................................18
Projection methods, Projector
position, Projection distances
Connections...............................20
Example of connecting to video
equipments, Example of connecting
to computer
Preparation for the remote
control unit..............................22
Basic Operation
Turning on the power................23
Turning off the power................25
Useful functions
Correcting keystone distortion
and automatic positioning.....27
Turning off the picture and sound
momentarily ............................28
Pausing a picture.......................28
Enlarging the picture.................29
Adjusting the volume ................29
Useful functions of the remote
control unit..............................30
Laser beam pointer, Wireless mouse
Adjustments and settings
On-screen menus ......................32
Menu screens, Menu operation
guide, Returning a setting to the
factory default
Adjusting the picture.................37
PICTURE MODE, CONTRAST,
BRIGHT, COLOR, TINT,
SHARPNESS, Colour Hue Setting,
4-E
NGLISH
Noise Reduction (NR), WHITE
BALANCE R/G/B, TV-SYSTEM,
Projecting sRGB-compatible pictures
Adjusting the position...............40
POSITION, DOT CLOCK, CLOCK
PHASE, KEYSTONE, OSD POSION,
ASPECT, RESIZING,
AUTO SETUP, FRAME LOCK
Audio adjustment ......................44
VOLUME, MUTE, AUDIO MODE
Changing the display language...44
Option settings ..........................45
OSD, AUTO SEARCH,
AUTO SIGNAL, AUTO KEYSTN,
RGB2 SELECT, RGB/YP P ,
B R
VGA60/525P, BLACKBOARD,
BACK COLOR, FRONT/REAR,
DESK/CEILING, FAN CONTROL,
LAMP POWER, LAMP RUN TIME,
FUNC 1, CONTROL KEY,
AUTO POWER OFF
Network setup............................48
SD card setup ............................48
Setting up the SECURITY
function ...................................49
PASSWORD SETTING, CHANGE
PASSWORD, TEXT DISPLAY,
CHANGE TEXT, LOGO DISPLAY,
CLEAR, CAPTURE
Care and maintenance
When the TEMP indicator and the
LAMP indicator are illuminated...52
Cleaning and replacing
the air filter ..............................54
Replacing the lamp unit ............55
Before calling for service..........58
Cleaning and maintenance .......59
Others
Specifications ............................60
Appendix ....................................62
List of compatible signals,
Connector pin wiring, Projection
dimensions calculation methods,
Using the SERIAL connector
Dimensions ................................66
Trademark acknowledgements...66

Precautions with regard to safety

WARNING
If a problem occurs (such as no image or no sound) or if you notice
smoke or a strange smell coming from the projector, turn off the power
and disconnect the mains lead from the mains socket.
B Do not continue to use the projector in such cases, otherwise fire or
electric shocks could result.
B Check that no more smoke is coming out, and then contact an Authorised
Service Centre for repairs.
B Do not attempt to repair the projector yourself, as this can be dangerous.
Do not install this projector in a place which is not strong enough to
take the full weight of the projector.
B If the installation location is not strong enough, it may fall down or tip over,
and severe injury or damage could result.
Installation work (such as ceiling suspension) should only be carried
out by a qualified technician.
B If installation is not carried out correctly, there is the danger that injury or
electric shocks may occur.
If foreign objects or water get inside the projector, or if the projector is
dropped or the cabinet is broken, turn off the power and disconnect the
mains lead from the mains socket.
B Continued use of the projector in this condition may result in fire or electric
shocks.
B Contact an Authorised Service Centre for repairs.
Do not overload the mains socket.
B If the power supply is overloaded (for example, by using too many
adapters), overheating may occur and fire may result.
Do not remove the cover or modify it in any way.
B High voltages which can cause fire or electric shocks are present inside
the projector.
B For any inspection, adjustment and repair work, please contact an
Authorised Service Centre.
Clean the mains lead plug regularly to prevent it from becoming
covered in dust.
B If dust builds up on the mains lead plug, the resulting humidity can
damage the insulation, which could result in fire. Pull the mains lead out
from the mains socket and wipe it with a dry cloth.
B If not using the projector for an extended period of time, pull the mains
lead plug out from the mains socket.
E -5
NGLISH