Table of Contents
Advertisement
Network
Select [Setting] from the Main Menu (see
"Navigating through the menu" on page 35),
then select the item from the sub-menu.
Remote Control
Projector name
You can change the projector name to be displayed
on the network.
1 )
Press ▲ ▼ to select [Projector name],
and press <SELECT> button.
2 )
Select characters with the ▲ ▼◄►
buttons and press the <SELECT>
button to enter the projector name
3 )
Select [Set] with the ▲ ▼◄► buttons
and press the <SELECT> button.
Select [Cancel] to undo the changes and then
press the <SELECT> button. Select [BS] to delete
one character selected with the cursor in the input
box.
4 )
Select [Yes] or [No] with the ▲ ▼◄►
buttons and press the <SELECT>
button.
Network setup
You can make detailed wired LAN settings.
1 )
Press ▲ ▼ to select [Network setup],
and press <SELECT> button.
2 )
Press ▲ ▼ to select an item, and
change the setting according to the
instructions.
Control Panel
On:
Off:
DHCP
(DHCP client
function)
IP address
Enter the IP address if
(Display of IP
DHCP server is not used.
address and setting)
Subnet mask
(Displaying and
If not using a DHCP server,
setting the subnet
enter the subnet mask.
mask)
Default gateway
Enter the gateway address if
(Display of gateway
DHCP server is not used.
address and setting)
DNS1
(Display of
Enter the DNS server
Preferred DNS
address if DHCP server is
server address
not used.
and setting)
DNS2
(Display of
Enter the alternate DNS
Alternate DNS
server address if DHCP
server address
server is not used.
and setting)
3 )
Press ▲ ▼◄► to select [Set], and press
<SELECT> button.
Default wired LAN settings
z
The following settings are set before the
projector leaves the factory.
DHCP
IP address
Subnet mask
Default gateway
DNS 1/DNS 2
Note
Before using the DHCP server, make sure the DHCP
z
server is already functioning.
For details of IP address, subnet mask, gateway and
z
DNS, ask the network administrator
Network
If a DHCP server
exists in the network
to which the projector
is connected, the
IP address will
automatically be
acquired.
If a DHCP server
does not exist in
the network to
which the projector
is connected,
additionally set [IP
address], [Subnet
mask ] and [ Default
gateway ].
Off
192.168.10.100
255.255.255.0
192.168.10.1
NONE
.
ENGLISH -
59
Advertisement
Table of Contents
