Preparation For The Remote Control Unit; Turning On The Power - Panasonic PT-L735E Operating Instructions Manual

Preparation for the remote control unit

# Open the cover.
$ Insert the batteries so that the
polarities are correct, and then close the
cover.
〇 +
AAA batteries
(two)
NOTE:
B Do not drop the remote control unit.
B Keep the remote control unit away from liquids.
B Remove the batteries if not using the remote control unit for long periods.
B Do not use rechargeable batteries.
Operating range
If the remote control unit is held so that it is facing directly in front of the
remote control signal receptors on the front or rear of the projector, the
operating range is within approximately 7 m (23´) from the surfaces of the
receptors. Furthermore, the remote control unit can be operated from an
angle of ±30° to the left or right and ±15° above or below the receptors.
NOTE:
B If there are any obstacles in between the remote control unit and the
receptors, the remote control unit may not operate correctly.
B If strong light is allowed to shine onto the remote control signal receptor, correct projector
operation may not be possible. Place the projector as far away from light sources as possible.
B If facing the remote control unit toward the screen to operate the projector,
the operating range of the remote control unit will be limited by the amount
of light reflection loss caused by the characteristics of the screen used.
22-E
NGLISH
〇 −
〇 +
〇 −

Turning on the power

Before turning on the power
1, Ensure that all components
are connected properly.
2, Connect the accessory mains lead.
3, Remove the lens cover.
$
POWER AUTO SETUP
(
RGB LASER
VIDEO MENU
PAGE
&
'
Lens cover
R-CLICK ENTER
Press the MAIN POWER switch to turn on the
#
power.
BThe power indicator on the projector will illuminate red.
$
Press the POWER button.
BThe power indicator on the projector will flash green. After a short
period, the indicator will illuminate green, and a picture will be
projected.
%
Turn on the power of all connected devices.
BStart the play function of a device such as a DVD player.
NOTE:
B A tinkling sound may be heard while the power indicator is turned off,
but this is not a sign of a malfunction.
#
Mains lead
Power indicator
)
*
'
E -23
NGLISH