Before Use - Panasonic PT-L735E Operating Instructions Manual

Commercial use
Hide thumbs Also See for PT-L735E:
Table of Contents

Advertisement

Before use

Cautions when moving the projector
Be sure to attach the lens cover before moving the
projector.
The projection lens is extremely susceptible to vibration and
shocks. When moving the projector, use the accessory
carrying bag. When placing the projector inside the carrying
bag, position it so that the lens is facing upward.
Cautions regarding setting-up
Avoid setting up in places which are subject to vibration
or shocks.
The internal parts can be damaged, which may cause
malfunctions or accidents.
Do not set up the projector near high-voltage power lines
or near motors.
The projector may be subject to electromagnetic interference.
If installing the projector to the ceiling, ask a qualified
technician to carry out all installation work.
You will need to purchase the separate installation kit (Model
No.ET-PK735). Furthermore, all installation work should only
be carried out by a qualified technician.
If using this projector at high elevations (above 1400 m),
set the FAN CONTROL to "HIGH". (Refer to page 46.)
Failure to observe this may result in malfunctions.
10-E
NGLISH
Notes on use
In order to get the best picture quality
Draw curtains or blinds over any windows and turn off any
fluorescent lights near the screen to prevent outside light or
light from indoor lamps from shining onto the screen.
Do not touch the surfaces of the lens with your bare
hands.
If the surface of the lens becomes dirty from fingerprints or
anything else, this will be magnified and projected onto the
screen. Moreover, when not using the projector, retract the
lens and then cover it with the accessory lens cover.
About the screen
Do not apply any volatile substances which may cause
discolouration to the screen, and do not let it become dirty or
damaged.
About the wireless card and SD memory card
(PT-L735NTE only)
Static electricity from the human body can damage the
wireless card or SD memory card. To prevent this, you should
touch a nearby metallic object such as an aluminium sash or a
door knob to dissipate the static charge from your body.
About the wireless card slot and SD memory card slot
(PT-L735NTE only)
Make sure that there are no foreign objects inside the slot
when inserting the wireless card or SD memory card. Failure
to observe it may damage the card and the slot.
About the lamp
The lamp may need to be replaced earlier due to variables
such as individual lamp characteristics, usage conditions and
the installation environment, especially when the projector is
subjected to continuous use for more than 10 hours or the
power is frequently turned on and off.
E
-11
NGLISH

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-l735nte

Table of Contents