Identifying Controls; Main Unit - Panasonic TH-55SF1HU Operating Instructions Manual

Hide thumbs Also See for TH-55SF1HU:
Table of Contents

Advertisement

Identifying Controls

Main Unit

To take out/store the power indicator and remote
control sensor, operate the lever on the rear panel.
It is also possible to press the remote control
sensor directly to store.
Note
For normal use, pull out the power indicator and
remote control sensor from the edge side of the
main unit by operating the lever on the rear panel.
Depending on the setup condition such as when
using the multi display, store them in the main unit.
1 Power Indicator / Remote control sensor
The Power Indicator will light.
When the power of the unit is ON (Main Power On
/ Off button: ON)
Picture is displayed: Green
Power OFF (Standby) with remote control:
When [Network control] is set to [Off]: Red
When [Network control] is set to [On]: Orange
(Red/Green)
About [Network control] settings, see page 54.
Power OFF with "Power management" function
(see page 50): Orange (Red/Green)
When the power of the unit is OFF (Main Power
On / Off button: OFF): No light
Note
The unit will still consume some power as long as
the power cord is still inserted into the wall outlet.
When the power indicator is orange, power
consumption during standby is generally larger than
that of when the power indicator is red.
Unit
INPUT
MENU
ENTER
1 External Input / Output Terminal
Connects to video equipment, PC, etc. (see page
15)
2 <Main Power On / Off button>
Turns the power On / Off.
3 <INPUT (Unit)> (INPUT signal selection)
Selects the connected device. (see page 31)
4 <MENU (Unit)>
Each time the <MENU (Unit)> button is pressed,
the menu screen will switch. (see page 35)
5 <+ (Unit)> / <- (Unit)>
Adjusts the volume. (see page 32)
On the main screen, switches settings or adjusts
settings level. (see page 35)
6 <
(Unit)> / <
(Unit)>
Selects the setting item. (see page 35)
7 <ENTER (Unit)>
Configures the item on menu screen. (see page
35)
Switches aspect mode. (see page 33)
8 Built-in speakers
Note
To output sound from the built-in speakers of the unit,
be sure to set [Output select] in the [Sound] menu to
[SPEAKERS]. (see page 39)
55-inch model
8
49-inch model
8
42-inch model
8
English
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Th-49sf1huTh-42sf1huTh-55sf1hwTh-49sf1hwTh-42sf1hw

Table of Contents