Table of Contents
Advertisement
[DIGITAL LINK power management]
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (sync signal) are detected for
60 seconds or so at DIGITAL LINK input:
Power is turned off (standby); the power indicator
lights up orange.
When pictures (sync signal) are subsequently
detected:
Power is turned on; the power indicator lights up
green.
[DVI-D power management]
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (sync signal) are detected for
60 seconds or so at DVI-D input:
Power is turned off (standby); the power indicator
lights up orange.
When pictures (sync signal) are subsequently
detected:
Power is turned on; the power indicator lights up
green.
[PC power management] (DPMS function)
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (HD/VD sync signals) are
detected for 60 seconds or so at PC input:
Power is turned off (standby); the power indicator
lights up orange.
When pictures (HD/VD sync signals) are
subsequently detected:
Power is turned on; the power indicator lights up
green.
Note
●
This function is effective when [Sync] in [Signal] is
set to [Auto] or [HV sync] and [Component/RGB-in
select] is set to [RGB]. (see page 46)
Note
●
If [Input search] is set to items other than [Off], the
[Input search] function is prioritised. (The "Power
management" function does not operate for each
terminal.) (For details of [Input search] function, see
page 60.)
●
If [Failover/Failback] - [Input change mode] is set to
items other than [Off], the [Failover/Failback] function
is prioritised. (The "Power management" function
does not operate for each terminal.) (For details of
[Failover/Failback] function, see page 61.)
[Power save]
This function adjusts the brightness of the backlight to
reduce power consumption.
[Off]:
This function does not operate.
[On]:
Backlight brightness is reduced.
Note
●
If this function is set to [On] when [Setup] -
[LightID] is set to [External control] or [Internal ID],
[Picture] - [Backlight] is fixed to [Low].
LightID
Changes the transmission setting for the LightID.
[External
Sends the ID set from outside.
control]:
When the LightID is switched from this
setting, or the unit is turned off, the ID being
sent is cleared.
[Internal
When the LightID is switched to this setting,
ID]:
or the unit starts up, the internal ID (Internal
LightID) is sent.
The ID set from outside can also be sent.
[Off]:
The function is disabled.
Use either of the following methods to set the ID from
outside.
Multi Monitoring & Control Software (see page 76)
•
USB Media Player (see page 84)
•
Note
For purchasing LightID, see the following Panasonic
web site.
http://panasonic.net/avc/LinkRay/
As default, a sample ID is included in the Internal
LightID.
If [LightID] is set to [Internal ID] at the time of
purchase, an ID to guide you to the Panasonic
homepage is sent.
●
In the following cases, the reception performance of
the LightID using devices, such as a smartphone may
be degraded.
When the LCD panel of this unit is exposed to an
•
external intense light, etc.
When the multi display setting is used with this
•
unit, or another LightID transmission device is
installed adjacently
When receiving far away from this unit, or receiving
•
at a location other than the front of this unit
When receiving from a dark image scene or black
•
parts outside the display range of the LCD panel
●
When sending the LightID, displayed images may
flicker due to the brightness change of the LightID
transmission. This is not a malfunction.
51
English
Advertisement
Table of Contents
