Picture Adjustments - Panasonic TH-55SF1HU Operating Instructions Manual

Picture Adjustments

1
Press <PICTURE> to display the
[Picture] menu.
Picture
Default Default
Picture mode
Backlight
Contrast
Brightness
Colour
Hue
Sharpness
Enhance level
Gamma
Colour temperature
6-segment colour management
Dynamic contrast
Colour enhancement
Refine enhancer
Gradation smoother
Memory save
Memory load
Memory edit
2
Select the item to adjust with
●
Menu that cannot be adjusted is greyed out.
3
Adjust with
4
Press <PICTURE> to exit from adjust
mode.
■
To return to the previous screen
Press <RETURN>.
■
To reset to defaults
Press <DEFAULT> while the menu is displayed, or
press <ENTER> when [Default] is selected, then the
settings will be set to factory settings.
Note
●
When displaying still picture with USB input (USB
media player), only the following settings have an
effect on the picture.
[Backlight], [Gamma], [Colour temperature]
40
English
Standard
50
50
50
50
50
50
High
2.2
6500K
Off
5
Off
Off
Off
.
[Picture mode]
.
Note
●
DICOM is the abbreviation for "Digital Imaging and
Communications in Medicine", which is a standard
for communications between medical imaging
devices. Although "DICOM" is used as a picture
mode name, this unit is not a medical device. Do
not use displayed images for such purposes as
diagnosis.
[Backlight]
Note
●
If [Setup] - [LightID] is set to [External control] or
[Internal ID], 3 levels of adjustment is available,
which are [High], [Mid] and [Low].
[Contrast]
● In [ENGLISH(US)] OSD language, [Contrast] is
displayed as [PICTURE].
This menu switches to easy-to-
see pictures suitable to the picture
source or environment where this
unit is used.
[Vivid signage]
Suitable for signage applications
featuring more vivid and sharper
images in bright environments
such as a shop.
[Natural signage]
Suitable for signage applications
such as merchandise exhibition,
featuring natural tone images
with colour reproduction
emphasized under light.
[Standard]
Faithfully reproduces original
picture.
[Surveillance]
Tone-focused pictures with
brightness reduced suitable for
input from a monitoring camera.
[Graphic]
Suitable for PC input.
[DICOM]
Pictures close to the grayscale
standard DICOM Part14.
● The settings are memorised
separately for each input
terminal.
Adjusts luminance of the back light.
Darker ↔ Brighter
Selects the proper brightness and
density for the room.
Less ↔ More