Xerox work centre 7800 series Installation Manual page 26

Appendix
EFI Controller Option:
Space Requirements / Service Space Envelope
The Fiery Network Controller stands beside or behind the print engine. The Fiery connects to the Print engine Ethernet port via 10ft. crossover cable.
The Fiery Network Controller was designed to be customer installable; however, it can be a billed Xerox install.
Physical specifications
Operating environment:

Temperature: +10°C to +40°C
Relative humidity: 10% to 85% (non-condensing)
Power supply rating: 180W
Power consumption: (Typical) 100W, 1 AMP, (Maximum) 220 W, 2 AMP
Dimensions (Depth x Width x Height):
27.15 cm (10.69 in.) x 17.78 cm (7 in.) x 30.48 cm (12 in.) (dimensions with support stand)
o
27.15 cm (10.69 in.) x 8.90 cm (3.52 in.) x 29.70 cm (11.69 in.) (dimensions without support stand)
o
Weight: 5.58 kg (12.30 lbs.)
o
Space requirement
Recommend a minimum of 1 inch clearance for proper air flow to the fan.
Environmental Requirements
The Fiery Network Controller has a separate power cord which plugs into the customer's wall outlet.
Customer is responsible for supplying one network drop to enable the install.
Fiery Network Controller Options
Supported Purchasable Options

Fiery Options Bundle
Includes: Fiery Spot On, Auto Trapping, Hot Folders/Virtual Printers
o

Network Switch
Network Specifications
Protocol Printing Services
TCP / IP (IPv4 & IPv6) LPD / LPR
Bonjour Port 9100
SMB
IPP
Email (POP3/IMAP)
SLP
WSD
Note: IPv6 connectivity to the MFP will not be operational when EFI controller is connected.
Fiery Network Controller Specifications

Intel Pentium G850 Processor 2.9 GHz

1 GB RAM

500 GB hard drive

10/100/1000 BaseT RJ45 Network connectivity

4 USB Ports for media printing

Linux Operating System with Fiery System 150
Printer Driver Support
Windows Vista/ Windows Server 2008/ Windows Server 2008 R2/ Windows 7/ Windows 8/ Windows 8.1/ Windows Server 2012/ Windows Server 2012 R2

Post Script (Fiery Driver 4.8)

Microsoft Certified Drivers (WHQL)
Mac (Intel)

OS 10.7 or later

Fiery Driver 4.8
SAP
Customer Expectation and Installation Guide
Supported Frame
Types
Ethernet
®
WorkCentre 7800 Series
23