Section 1: Ddc Controller Quick Start Guide (Using Computer); Part 1: Initial Computer And Prismd Setup - Daikin DDC Quick Start Manual

Section 1: Goodman DDC Controller Quick Start Guide (Using Computer)
Note:
This Quick Start Guide is only for reference to make the startup process faster. If more information is required on any of
the features or wiring, please refer to the DDC Controller Technical Guide and the PrismD Technical Guide.
Part 1: Initial Computer and PrismD Setup
1. Install PrismD software and the USB drivers on your computer. PrismD and the USB drivers can be downloaded
at www.daikin.wattmaster.com. You can also find installation instructions there for both of these items.
2. After PrismD and the USB drivers have been successfully installed on your computer, you can then connect a
standard USB cable between the computer and controller. See Figure 1.
DDC Controller
USB Cable
Connect to Computer
with PrismD Software Installed
For Stand-Alone Programming
Figure 1: USB Cable Connection
1