Delay Start - Miele PW 5065 Operating And Installation Instructions

Delay start

You cannot use the delay start
function if your machine is fitted with
a payment system.
With delay start you can choose when
you want the programme to end. The
start of a programme can be delayed
from 30 minutes up to a maximum of 24
hours, allowing you to make use of
night-time economy electricity rates, for
example.
The current time of day needs to
have been set for delay start to work
correctly.
To select delay start
^ Select the programme you want and
then press the m button.
7:51
Start:
Finish:
The display shows the current time of
day and the time the programme is due
to end.
^ Use the + button to select the time
you want the programme to end at.
7:51
Start:
Finish:
The first press on the button will adjust
the programme end time to the next full
or half hour. Each subsequent press on
the button will delay the programme
end time by 30 minutes.
Use the – button to shorten the time if
you have chosen too long a time.
24
7:51
9:19
10:32
12:00
^ Confirm the programme end time by
pressing the OK button.
To begin delay start
^ Press the Start button.
60°C
Start in:
The display will show when the
programme will be started in hours and
minutes.
To alter delay start
^ Press the m button.
^ Use the + and - buttons to alter the
time you want the programme to end
at.
^ Press the OK button to confirm.
To cancel delay start
^ Press the m button.
^ Use the - button to bring the end time
of the programme forward until it is
the same as the current time of day.
^ Press the OK button to confirm.
The programme will now start immedi-
ately.
The actual load size can only be
determined accurately by the
machine once the programme has
started. The programme end time
may, therefore, be a bit earlier than
first indicated.
1200 rpm
2:41 h