Minimum Iron Duration; Pre-Wash Cottons; Minimum Iron; List Special Progs - Miele PW 5065 Operating And Installation Instructions

Washer-extractor
Hide thumbs Also See for PW 5065:
Table of Contents

Advertisement

Settings/Supervisor level menu

Minimum iron duration

You can increase the wash duration
for the main wash in the Minimum
iron programme.
The machine is delivered with the Block
parameters option selected (the wash
duration will be controlled according to
the programme data which has been
programmed on site).

Pre-wash Cottons/

Minimum iron

You can choose for pre-wash to be
carried out with every Cottons and
Minimum iron programme or to select
it on an individual basis.
If pre-wash has been selected as a
default (Standard option), the indicator
light for the Pre-wash button will be lit
up.
The machine is delivered with the
Select from menu option activated.

List special progs.

The list of special programmes in the
display can be changed.
1. Factory default: The Quick wash,
Shirts, Starch, Pillows, Outerwear,
Proofing and Separate rinse
programmes are listed in the display.
74
2. Intensive: The Intensive wash and
Hygiene* programmes are available in
addition to those listed under option 1.
* The Hygiene programme only
appears in the display when the
Hygiene setting is switched on at the
same time.
3. Bakers: The Flour, Flour + and
Grease and fat programmes are
available in addition to those listed
under option 1.
4. Butchers: The Grease and fat and
Grease and fat + programmes are
available in addition to those listed
under option 1.
5. Hairdressers: The Towels, Towels +
and Capes programmes are available
in addition to those listed under
option 1.
6. Disinfection: The Ch. Therm. Dis.
(Chemo-thermal disinfection 20 mins
60°C) and Thermal Dis. (Thermal
disinfection 15 min 85°C) programmes
are available in addition to those listed
under option 1..

Hygiene

The option to start the Hygiene
programme appears in the display
when a programme which uses a
temperature of less than 60°C is
selected. The Intensive option needs
to be selected under the List special
progs. setting.
The machine is delivered with this
option deactivated.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents