wsm wg972-e4 Workshop Manual page 43

WG972-E4, WSM
Replacing Fuel Filter
[WG972-GL, WG972-G]
1. Loosen clamps and remove the fuel hoses.
2. Replace the fuel filter with the new one.
CAUTION
• Stop the engine when trying to check and clean the fuel
filter.
• Gasoline fuel is extremely flammable, so avoid fires.
(1) Gasoline Fuel Filter
(2) Fuel Hose
Checking Fan Belt Tension
1. Measure the deflection (A), depressing the belt halfway
between the fan drive pulley and alternator pulley at specified
force 98 N (10 kgf, 22 lbf).
2. If the measurement is not within the factory specifications,
adjust the fan belt tension.
Deflection (A) Factory specification
(A) Deflection
Checking Fan Belt Damage and Wear
1. Check the fan belt for damage.
2. If the fan belt is damaged, replace it.
3. Check if the fan belt is worn and sunk in the pulley groove.
4. If the fan belt is nearly worn out and deeply sunk in the pulley
groove, replace it.
(A) Good
Adjusting Fan Belt Tension (If Necessary)
1. Loosen the alternator mounting screws.
2. Relocate the alternator to adjust fan belt tension with the
specified deflection.
Deflection (A) Factory specification
(A) Deflection
G-17
(Gasoline Line) (If
(3) Clamp
9Y1211108GEG0029US0
7.0 to 9.0 mm
0.28 to 0.35 in.
9Y1211108GEG0030US0
(B) Bad
9Y1211108GEG0031US0
7.0 to 9.0 mm
0.28 to 0.35 in.
9Y1211108GEG0032US0
KiSC issued 07, 2015 A
GENERAL
Necessary)