Changing A Name Of The File Or Folder; Direct Pc-Link - Janome Skyline S9 Instruction Book

q

Changing a name of the file or folder

Press the rename key and select the file or folder for
which you wish to change the name.
The keyboard window will open.
Enter a new name and press the OK key.
The name of the file or folder will change.
q Rename key
If you enter a name that already exists, the message "The
same name exists." will appear.
Press the X key and enter another name.

Direct PC-Link

You can connect your sewing machine to a PC with the
USB cable included in the standard accessories.
You need to install EmbroideryEditor and the USB driver
for your sewing machine on your computer.
Embroidery Editor and the USB driver are available
in the Acutools S CD-ROM included in the standard
accessories.
Start up your sewing machine and PC, and insert the
type "A" USB connector into the PC.
Insert the type "B" connector into your sewing machine.
You can send original stitch patterns created with Stitch
Composer and original embroidery design data from a
PC to your sewing machine.
Refer to on-screen help of EmbroideryEditor for more
details.
CAUTION:
Do not turn the power off or disconnect the USB cable
while the data transfer is in progress, as this will cause
loss of data and can damage the machine's memory.
159