Changing A Name Of The File Or Folder; Direct Pc-Link - Janome Horizon Instruction Book

Changing a name of the file or folder

q
Press the rename key and select the file or folder which
you wish to change its name.
The keyboard window will open.
Enter a new name and press the OK key.
The name of the file or folder will change.
q Rename key
If you entered a name that already exists, a confirmation
message will appear.
Press the X key and enter another name.

Direct PC-Link

You can connect the MC 12000 to a PC with the USB cable
included in the standard accessories.
You need to install Horizon Link and the USB driver for the
MC 12000 on your computer.
Horizon Link and the USB driver are available in the Horizon
Link CD-ROM included in the standard accessories.
Start up the MC 12000 and PC, and insert the type "A"
USB connector into the PC.
Insert the type "B" connector into the MC 12000.
You can send original stitch patterns created with Stitch
Composer and original embroidery design data from a PC
to the MC 12000.
Refer to on-screen help of Horizon Link for more details.
CAUTION:
Do not turn the power off or disconnect the USB cable
while the data transfer is in progress, as this will cause
loss of data and can damage the machine's memory.
133