Special Bobbin Holder For Embroidery - Janome Skyline S9 Instruction Book

z
x
t
q
w
r
e

Special Bobbin Holder for Embroidery

Replace the standard bobbin holder with the special
bobbin holder for embroidery when using bobbin threads
other than Janome bobbin thread for embroidery.
NOTE:
The special bobbin holder is marked with a yellow dot
for identification.
q Yellow dot
z Remove the needle plate (refer to the previous page).
Take out the standard bobbin holder.
w Standard bobbin holder
x Insert the special bobbin holder into the hook race.
Make sure to match the knob of the bobbin holder with
the stopper on the machine.
Attach the needle plate.
e Knob
r Stopper
t Special bobbin holder for embroidery
NOTE:
Use the standard bobbin holder when sewing lace
designs and quilting designs that use the same thread
for the bobbin as the needle thread.
111