Changing A Name Of The File Or Folder; Direct Pc-Link - Janome Memory Craft 500E Instruction Book

q

Changing a name of the file or folder

Press the rename key and select the file or folder for
which you wish to change the name.
The keyboard window will open.
Enter a new name and press the OK key.
The name of the file or folder will change.
q Rename key
If you enter a name that already exists, the message "The
same name exists." will appear.
Press the X key and enter another name.

Direct PC-Link

You can connect the MC 500E to a PC with the USB
cable included in the standard accessories.
You need to install Embroidery Editor and the USB driver
for the MC 500E on your computer.
Embroidery Editor and the USB driver are available in
the Embroidery Editor CD-ROM included in the standard
accessories.
Start up the MC 500E and PC, and insert the type "A"
USB port into the PC.
Insert the type "B" connector into the MC 500E.
You can send original embroidery design data from a PC
to the MC 500E.
Refer to on-screen help of Embroidery Editor for more
details.
CAUTION:
Do not turn the power off or disconnect the USB cable
while the data transfer is in progress, as this will cause
loss of data and can damage the machine's memory.
57