Janome Skyline S9 Instruction Book page 152

y
o
e
r
u
y t
i
スタート
ストップ
!2
!1
!0
150
Retighten the needle clamp screw firmly with the
screwdriver.
Slide the yarn guide t onto the needle clamp screw y
firmly with the mouths u of the yarn guides up as shown.
t Yarn guide
y Needle clamp screw
u Mouths
NOTE:
Be careful not to turn the needle clamp screw when
sliding the yarn guide onto the needle clamp screw.
Insert the yarn guide bar i into the hole for the additional
spool pin o.
Turn the yarn guide to the right until it stops.
i Yarn guide bar
o Hole for the additional spool pin
Pass the yarn through the yarn guide bar.
Thread the yarn by passing it through the slit on the
mouth.
Thread the yarn through the left mouth for the couching
foot PC-1 !0 .
Thread the yarn through the right mouth for the couching
foot PC-2 !1 .
!0 Mouth for couching foot PC-1
!1 Mouth for couching foot PC-2
Unwind the ball of yarn !2 and splay out the yarn on a
sewing table to ensure smooth feeding without tangling.
Hold the yarn with both of your hands.
Slide the yarn under the plate, and slip it into the presser
foot hole.
Draw the yarn and needle thread to the rear.
e Plate
r Foot hole