Couching Designs - Janome Skyline S9 Instruction Book

q
w
e
r

Couching Designs

Enjoy embellishing your work with yarns.
Use the couching foot PC-1 or PC-2 for the couching
designs.
For weight 3 yarn (light), use the couching foot PC-1.
For weight 4 yarn (medium) use the couching foot PC-2.
NOTE:
• Use the weight 3 yarn (light) or weight 4 yarn
(medium) for the couching design project.
• Do not sew on a hard string.
• Test sew to check the sewing results.
• Do not use the single color sewing key for the
couching designs.
• Use the same color thread for the bobbin and the
needle thread as the yarns for the best result.
Select one of the couching design.
In the ready to sew window, press the embroidery foot
key w.
Select the couching foot PC-1 for the weight 3 yarn (light).
Select the couching foot PC-2 for the weight 4 yarn
(medium).
The presser foot height and sewing speed will be
automatically adjusted to suit the selected couching
design sewing.
If the yarn layers become too thick, press the adjust key
q and adjust the presser foot manually (refer to page
127).
CAUTION:
Press the lockout key to lock the machine when
attaching/removing the presser foot, yarn guide, and
threading the threads and yarns to the machine.
Preparation
Attach the selected couching foot to the machine.
To attach the couching foot, refer to page 23.
Turn the handwheel toward you.
Be sure that the needle through the center of the
couching foot.
Hold the thread with both of your hands.
Slide the thread under the plate, and slip it into the
presser foot hole.
e Plate
r Presser foot hole
149