Thread Color/Jog Key - Janome Skyline S9 Instruction Book

t
y
!0
!1
q
w
4. Custom trace and baste
The machine will baste around the embroidery area with
a 5 mm allowance when
However, you can customize the tracing and basting area
size by pressing
You can set the tracing and basting area by indicating the
left upper corner and lower right corner of the tracing and
basting area.
Press the
window.
The size of the tracing and basting area is displayed in
the center of the window y.
Press the
Press the OK key and the carriage moves to the left
upper corner of the basting area.
Press jog keys i to move the carriage to the desired
u
position.
i
Press the
lower corner of the basting area.
Press jog keys i to move the carriage to the desired
position.
Press the trace key !0 to trace the set area without
basting.
o
To trace and baste, press the start/stop button.
To return to the trace and baste area to their default
settings, press the default key !1 .
To close the tracing option window, press the X key.
i

Thread color/Jog key

Press the thread color/jog key to show or hide the jog
keys. The thread color list of the selected design is
displayed when the jog keys are hidden.
Adjust the hoop position with the jog keys so that the
needle position comes right above the center of the
reference lines on the fabric.
q Thread color/Jog key
w Thread color list
e Jog keys
e
125
keys are pressed.
key t.
key t to open the custom trace and baste
key u and a warning message will appear.
key o and the carriage moves to the right