Table of Contents
Advertisement
q
e
w
u
!0
e
r
r
i
o
y
t
u
Press the icon key of the desired font and the monogram
window will open.
Browse pages with the previous/next page keys.
You can enter alphabet letters, numbers, symbols and
European letters.
e Previous page key
r Next page key
NOTE:
The height of Micro Gothic font is approximately 5 mm.
Function keys
q Font selection key
Press this key to open the font selection window.
w Lettering orientation key
Press this key to select the horizontal or vertical
orientation.
e Letter size key
You can select the following 3 letter sizes by pressing this
key.
The approximate letter sizes of upper case are as follows:
30 mm (1.2˝)
L (Large):
20 mm (0.8˝)
M (Medium):
10 mm (0.4˝)
S (Small):
r Letter case key
Pressing this key changes the letter case from upper
case to lower case and vice versa.
t Delete key
Press this key to delete the character above the cursor or
the character in front of the cursor.
y Save file key
Pressing this key opens the save file window and allows
you to save the text or monogram as a file.
u Cursor key
Press these keys to move the cursor to the left or right.
i OK key
Press this key to confirm your entry and open the
embroidery screen.
o X key
Press this key to exit the monogram entry.
!0 Space adjust key
This key is activated only when a space is entered.
If the spaces between characters look uneven, insert a
blank space between characters and adjust the space
width to justify.
Press this key to open the space adjustment window.
To increase the space width, press the "+" key.
To decrease the space width, press the "–" key.
NOTE:
The space width is shown only in millimeters.
118
Advertisement
Table of Contents
