Others; Setting The Dip Switch - JUKI LK-1903A-305 Instruction Manual

[9] �THERS
1. Setting the DIP switch
SDC p.c.b.
1
MAIN p.c.b.
When "4" of DIP swtch
turned ON, the penetratng force s ncreased. Turn t
ON when the penetrating force is insufficient.
Turn OFF all DIP swtches other than the swtch above.
Perform the changeover of DIP switch
after turning ��� the power.
2
�e very careful of the heat of the main
shaft motor.
Turn OFF all DIP swtches of MAIN p.c.b.
45
－ －
on SDC crcut board
2
s
1