Others; Setting The Dip Switch - JUKI LK-1901AN Instruction Manual

[9] OTHERS

1. Setting the DIP switch
SDC p.c.b.
1
MAIN p.c.b.
When "4" of DIP switch 2 on SDC circuit board
turned ON, the penetrating force is increased. Turn it
ON when the penetrating force is insufficient.
Turn OFF all DIP switches other than the switch above.
Perform the changeover of DIP switch
after turning OFF the power.
2
Be very careful of the heat of the main
shaft motor.
Turn OFF all DIP switches of MAIN p.c.b.
45
－ －
is
1