JUKI LK-1903A-305 Instruction Manual page 43

4) Indcate "000" wth
value returns to the ntal value at the tme of
delvery from the factory wth
Press key to cancel the operaton here
and return to the state of step 2).
5) Press key. The sewng LED goes off
and the set value of the first stitch is registered.
6) Indcate memory swtch No. 3 wth
key.
Here, set the sewng speed of the second sttch.
7) Press key The sewng LED lghts up and
the set value of the second sttch s ndcated.
8) Indcate "2000" wth
The value returns to the ntal value at the
tme of delvery from the factory wth
Press key to cancel the operaton here
and return to the state of step 6).
9) Press key. The sewng LED goes off and
the set value of the second sttch s regstered.
0) Press key. The memory switch setting mode is finalized and the mode returns to the normal mode.
(3) Setting whether the calling of pattern data is operative or not
By makng noperatve the callng of the unnecessary pattern, ths settng prevents the dfferent pattern
from callng by mstake.
Also, t s possble to call and use the necessary pattern.
Settng example : Make the callng of pattern Nos. 2 and 3 noperatve.
) Press key n the state that the sewng
LED s put out.
2) Indcate memory swtch No. 20 wth
key.
or key. The
e
key.
e
or
e
e
or key.
e
key.
e
e
or
e
40
－ －