Miele G 7835 CD Installation And Operating Instructions Manual page 7

~
In order to prevent damage to the
machine and any accessories through
processing chemicals or dirt as well as
any interaction between them, see the
instructions in the section Chemical
process.
~
Even when a certain processing
chemical is recommended, the
appliance manufacturer takes no
responsibility for the effect of such
chemicals on the material of the items
to be treated.
Note that formulation changes, storage
conditions, etc. that are not disclosed
by the manufacturer may alter the
cleaning results obtained.
~
When using processing chemicals,
it is essential that the manufacturer's
instructions are followed. Use the
processing chemicals only for the
applications intended by the
manufacturer to avoid possible
chemical reactions (such as explosive
oxyhydrogen gas reactions).
~
For critical applications, where very
high processing-quality requirements
have to be met, it is strongly
recommended that all process-related
factors (cleaning agents, water quality,
etc.) be discussed in advance with
Miele's Application Specialist.
~
For applications that demand
especially stringent cleaning and
rinsing, (e.g., chemical analysis,
special industrial processes, etc.) the
operator must perform quality control
on a regular basis to ensure the
required standard.
Safety instructions and warnings
~
The mobile units, baskets and
inserts must only be used for their
specific applications.
Hollow items must be positioned for full
exposure to wash water.
~
Empty all containers and hollow
utensils before loading them.
~
Ensure that no acid or solvent
residues, especially hydrochloric acid
or chloride solutions, get inside the
wash cabinet. This also applies for
corrosive ferrous material. Solvents
combined with contaminants
(especially from hazard class A1)
should be present in trace amounts
only.
~
To avoid corrosion damage, make
sure the stainless steel housing does
not come into contact with
solutions/steam containing hydrochloric
acid.
~
Whenever work is conducted on the
tap water network, the water supply line
to the machine must be cleared of air.
Failure to do so can result in damage to
the machine.
~
Please be sure to follow the
installation instructions in this manual
and in the separate installation manual.
7