Operation - HTC 950 RX Manual

Operation

The HTC 950 RX™ contains a number of functions that are
important to know prior to operation. Read carefully through
the functions of the various systems to ensure that you fully
understand their purpose, this will ensure your optimal use
of the grinder.
Handle setting
Set a suitable working height using the adjustable handle
on the HTC 950 RX™. A handle locking
mechanism is located on both the upper (see picture 1)
and lower side of the handle cover. The handle can be
folded in several different positions (see picture 2.)
Picture. 1.. Release. the. handle. by. moving. the. two. round. safety.
grips.against.each.other..The.handle.now.drops.to.the.required.
fixed position. Release the safety grips again to lock.
Forwards position: Used when transporting etc.,
when the grinder takes up substantially less space.
Up position: Is ideal when operating via the radio
control unit. Run the mains cable and if necessary
the extractor hose through the handle in this case.
This position also applies when the machine is tilted
backwards when changing grinding tools.
Back position: Always use when operating the grind-
er manually but can also be used when operating via
radio control.
Up.position
Back.position
Picture.2..Depending.on.the.type.of.work.task.a.suitable.position.
can.be.set.using.the.HTC.950.RX™.adjustable.handle.

Forwards.position