Transport; Preparation For Start; Operation; Standby - HTC 650 HDX Manual

Transport

The HTC 650 can be trans-
ported with its lifting eye
using lifting implements
such as a fork-lift or crane.
When lifting the machine,
the weights must be locked
in forward position and the
handle must be in "up" posi-
tion in order to attain equili-
brium around the lifting eye.
See Picture 1.
Picture. 1.. Lock. the. grinder. weights. in. forwards. position. and. fold. the.
handle.upwards.when.lifting.via.the.lifting.eye.

Preparation for start

Prior to start and operation of the HTC 650, you should
check that the grinder and any peripheral equipment are
in tact. Ensure that the correct grinding tool is mounted
and that it is for the right application.
Only use HTC original tools.
If the floor is to be dry ground, a dust extractor should
be connected and started before starting the machine.
Check the floor carefully and remove any protruding
items such as reinforcement bars, bolts, and any loose
material that could get caught in the machine.
Check that the splash guard is installed (See Picture on
Pages 12-13 pos no. 12).
Connect the machine to the mains via the electrical con-
nection (See Picture on Pages 12-13 pos no. 5.

Operation

The HTC 650 can be operated via the built-in control
panel, see Picture 1.
When operating, it is the operator who moves the grin-
der across the floor surface.

Standby

Turning the key on the grinder control panel to the right
is necessary in order to activate the grinder functions.
When the key is in this position the "Power lamp" lights
on the operator panel indicating that the grinder is in
"Standby mode".
Picture.1..Control.panel.on.the.machine..When.the.key.is.turned.to.
the.right,.the."Power.lamp".indicates.that.the.grinder.is.in.standby.
mode.
0