Tools - Access To Tools - HTC 650 HDX Manual

Tools - Access to Tools

The grinder must be tilted backwards in order to mount
and change tools.
Raise the handle to upright position and set the weights
furthest back, see Picture 1.
To get a better effect when tilting the grinder, the operator
can put one foot against a weight and slowly tilt the
grinder until the back weights reach the floor, see Picture
.
Always disconnect mains voltage from the grinder when
working with the grinding tools. Also remember that the
tools can be extremely hot following grinding work.
Picture.1..Fold.the.handle.straight.up.and.then.set.the.weights.to.back.
position.. Put. one. foot. against. the. framework. and. pull. the. machine.
towards.you.
Picture 2. Tilt the grinder backwards until the weights reach the floor.
Picture.3..Tilt.the.grinder.back.a.little.more.until.it.is.resting.in.back.
position.