Press Enter - Panasonic CF-52 Series Reference Manual

Hard Disk Data Erase Utility
6
Set the Product Recovery DVD-ROM into the CD/DVD drive.
7
Select the [Exit] menu, then select [TEAC DV-W28XXX] in [Boot Override].
8
Press .
Enter
The computer restarts.
If [Enter Password] is displayed during the following procedures, input the Supervisor Password or the User
Password.
9
Click [Erase the whole data on the Hard Disk for security] and click [Next].
10
At the confirmation message, click [YES].
11
Click [Continue].
12
Click [Continue] again.
13
Click [YES].
Erasing the hard disk data starts.
14
After erasing is completed, remove the Product Recovery DVD-ROM and click [OK].
9
Press to execute [2. [Erase HDD]].
2
To cancel this operation, press 0.
10
At the confirmation message, press
11
When [<<< Start menu >>>] is displayed, press
The approximate time required for erasing data will be displayed.
12
Press
Space
At the confirmation message, press Enter.
The hard disk erase process starts. When the operation is completed, the [Hard disk data has been deleted] mes-
sage will appear. If a problem has occurred during the operation, an error message will appear.
To cancel partway, press Ctrl + C. The data erasure will be up to that point.
13
Remove the Product Recovery DVD-ROM, and then press any key to turn off the com-
puter.
.
.
Y
.
Enter
98