Pc Card / Expresscard - Panasonic CF-52 Series Reference Manual

PC Card / ExpressCard

You can insert the following cards.
ExpressCard/34 or ExpressCard/54 to the ExpressCard slot (A)
(Only for model with ExpressCard slot)
PC Card Type I (3.3 mm) or II (5.0 mm) to the PC Card slot (B)
NOTE
The following types of card are not supported:
PC Card Type III (10.5 mm), ZV card, SRAM card, FLASH ROM card (excluding ATA interface type), and other cards
that require 12 V of operating voltage.
Do not start up Windows with a storage type of CardBus PC card attached. An error may occur.
Inserting/Removing the Card
Preparation
Attach the device for the media containing the card driver (e.g., CD-ROM). Equipment connected to the multimedia
pocket cannot be recognized if connected after the card driver installation screen appears.
To insert the card
1
Open the cover (C), and insert the ExpressCard (D) or the PC
Card (E) with the label side up until it securely fits in to the slot.
For further information, refer to the instruction manual of the card.
To remove the card
1
Disable the card function.
Click on the notification area and click
A
Select the card.
B
Double-click
A
Follow the on-screen instructions.
B
These steps are not necessary when removing the card after turning off the computer.
on the notification area and select the card, then click [Stop].
.
36