Panasonic CF-52 Series Reference Manual page 10

Sleep and Hibernation Functions
*3
In sleep or hibernation
Do not attach or remove a multimedia pocket device and peripheral devices. Doing so may cause malfunction.
Power is consumed in sleep
exhausted, the data retained in memory will be lost. Connect the AC adaptor when using the sleep
Do not turn on/off the wireless switch.
To resume from sleep
1
Open the display, or press the power switch (A).
In the default setting, the Windows password will be requested to resume.
When [Stand by] or [Hibernate] is selected as the setting for [When I close the lid of
my portable computer] (
CAUTION
Do not perform the following operations until resuming is complete. After the display is resumed, wait approximately
30 seconds (normally) or 60 seconds (when the computer is on a network).
• Touch the keyboard (except for password input), touch pad or power switch.
• Use an external mouse or other peripheral devices.
• Connect or disconnect the AC adaptor.
• Close or open the display.
• Shut down or restart Windows.
*3
• Enter sleep or hibernation (Wait approximately 1 minute).
• Operate the wireless switch.
• Insert and remove the SD Memory Card.
If the computer enters sleep
mouse will resume the computer.
NOTE
<Only for model with Bluetooth>
After resuming from sleep or hibernation, the message "TosBtMng has stopped working" may appear.
Click [Close program].
If Bluetooth connections are cut off, click
to the Bluetooth devices again.
*3
Windows XP: standby
*4
If the speakers are muted, beeps do not sound.
*5
Windows XP: [start]
*3
. Power consumption may increase when a PC Card is inserted. When power is
*3
or hibernation
page 7), you can resume operation opening the display.
*3
while a USB keyboard or mouse is connected, touching the USB keyboard keys or
*5
(Start) - [All Programs] - [Bluetooth] - [Bluetooth Settings], and connect
10
*3
function.