Download  Print this page

Advertisement

CF-19 / CF-30 / CF-52 / CF-74
Model No.
Contents
Names and Functions of Parts ................................... 2
Overview ....................................................................... 6
Installation .................................................................... 8
More Advanced Security ........................................... 12
Useful Information ..................................................... 13
Troubleshooting ......................................................... 18
Specifi cations ............................................................. 25
Terms and illustrations in this Manual
NOTE:
CAUTION:
[start] - [Run]:
(Start) - [All Programs]:
:
Some of the illustrations in this manual may differ slightly in shape from the
actual items in order to make the explanation easier to understand.
Supplementary Instructions
Useful and helpful information.
Condition that may result in minor or moderate injury.
Click [start], and then click [Run].
Click
(Start), and then click [All Programs].
Page in these Supplementary Instructions or in the
Reference Manual for the computer.
for Fingerprint Reader
Personal Computer
Series

Advertisement

   Related Manuals for Panasonic Toughbook CF-18BCAGCMM

   Summary of Contents for Panasonic Toughbook CF-18BCAGCMM

  • Page 1: Table Of Contents

    CF-19 / CF-30 / CF-52 / CF-74 Model No. Contents Names and Functions of Parts ... 2 Overview ... 6 Installation ... 8 More Advanced Security ... 12 Useful Information ... 13 Troubleshooting ... 18 Specifi cations ... 25 Terms and illustrations in this Manual Useful and helpful information.
  • Page 2: Names And Functions Of Parts

    Names and Functions of Parts Except the following, refer to the Operating Instructions for the computer. <CF-19 Series> (Appearance may differ, depending on specifi cations.) <CF-30 Series> Fingerprint Reader (Appearance may differ, depending on specifi cations.) Fingerprint Reader...
  • Page 3 <CF-52 Series> (Appearance may differ, depending on specifi cations.) <CF-74 Series> (Appearance may differ, depending on specifi cations.) Fingerprint Reader Fingerprint Reader...
  • Page 4: How To Use The Fingerprint Reader

    Names and Functions of Parts How to Use the Fingerprint Reader This section explains how your fi ngerprints are enrolled and authenticated. <CF-19 and CF-30 Series> Slide your fi nger to the right or left. To prevent a reading error. A Set the fi...
  • Page 5 CAUTION We shall not be liable for any loss or damage whatsoever resulting from your Fingerprint device or neglect of Fingerprint device use, or any data loss resulting from such developments as Fingerprint authentication device malfunctioning. <Only for CF-19 and CF-30 Series> To protect the fi...
  • Page 6: Overview

    Overview Fingerprint’s Outline The conventional security systems use ID/passwords and token devices such as IC cards to authenticate users. Therefore the passwords and token devices are exposed to the risk of being lost, stolen and hacking. The Fingerprint authentication method uses user’s fi ngerprints instead of passwords for security authentication.
  • Page 7: Security Functions

    fi ngerprint authentication. A Log on to Windows as an Administrator. B Click [start] - [All Programs] - [Panasonic] - [SD Card Setup]. C Remove a check mark from [Use the SD card when starting the computer].
  • Page 8: Installation

    Installation Step1 TPM Installation Refer to on-screen manuals “Installation Manual Trusted Platform Module (TPM)”. (<Model with Windows XP> Click [start] - [Run], enter [C:\util\drivers\tpm\ README.pdf], and click [OK]. / <Model with Windows Vista> Click README.pdf], and press Step2 Fingerprint Utility Installation Performed by the Computer Administrator.
  • Page 9 When the “Protector Suite ∗.∗ has been successfully installed.” message appears, click [Finish]. At the confi rmation message, click [Yes]. The computer restarts. Log on to Windows as an Administrator. The “Protector Suite QL Icon” Step 3 TPM Fingerprint Utility Initialization Performed by the Computer Administrator.
  • Page 10 Installation Step 4 User Fingerprint Enrollment Performed by each user. <Model with Windows XP> Click [start] - [All Programs] - [Protector Suite QL] - [User Enrollment]. The “Welcome” message appears, read the description carefully. <Model with Windows Vista> Click (Start) - [All Programs] - [Protector Suite QL] - [User Enrollment].
  • Page 11 “User Enrollment” wizard starts. Follow the on-screen instructions. NOTE Enroll at least two fi ngers. Even if one of them is injured, you can use another one to access your account and secret data. For further information about the enrollment, refer to “How to Use the Fingerprint Reader”...
  • Page 12: More Advanced Security

    fi ngerprint authentication will be necessary. A Turn on or restart the computer. B Press several times while [Panasonic] boot screen is displayed soon after the computer starts the startup procedure. C Select the [Security] menu. D Select [Set Supervisor Password], and press E Enter your password in the [Enter New Password], and press •...
  • Page 13: Useful Information

    Useful Information Backup The fi le described below is necessary for recovering the Fingerprint authentication data. Back up this fi le periodically in a safe location such as removable disk to avoid data loss resulting from some accidents. We recommend you to store the fi...
  • Page 14 Useful Information Password used by each user • Backup Password for Enrollment This backup password can be used in case of hardware failure to bypass the fi ngerprint authentication. CAUTION The passwords other than those explained above are also used for security, so do not lose them.
  • Page 15 For information of these functions, refer to the UPEK Protector Suite QL Help menu. (<Model with Windows XP> Click [start] - [All Programs] - [Protector Suite QL] - [Help] / <Model with Windows Vista> Click - [Help]) Handling & Maintenance The enrolling and authentication sensitivity may decline under the conditions below.
  • Page 16 Useful Information B Click [Settings], and click [Power-on Security]. C <Model with Windows XP> Remove the check mark from [Replace the power-on and hard drive passwords with the fi ngerprint reader.], and click [OK]. <Model with Windows Vista> Remove the check mark from [Enable power-on security using fi...
  • Page 17 NOTE If the enrollment mode is set to “Enrollment to the hard disk” ( 10), you need to remove the fi ngerprints data after Step 2. Performed by the Computer Administrator. A <Model with Windows XP> Click [start] - [All Programs] - [Protector Suite QL] - [Control Center]. <Model with Windows Vista>...
  • Page 18: Troubleshooting

    Clean the fi ngerprint sensor. (For further information, refer to “Handling & Maintenance” ( The fi ngerprint sensor may be malfunctioning when it continues to perform poorly after the steps described above have been performed. Contact PANASONIC TECHNICAL SUPPORT. page 4) and (Start) -...
  • Page 19 For Application Sensor does not work. User cannot use enrolled fi nger. (e.g. injury) Exported passport can help you if you need to replace the sensor. • Log on to Windows as an Administrator. You can always access the computer by using your Windows log on password.
  • Page 20 Troubleshooting User cannot use enrolled fi nger. (e.g. injury) (continued) TPM failure. • If you do not use “Advanced Security”, you can still enter using the Windows password. • If you use “Advanced Security” with backup password, you can enter using the backup password.
  • Page 21 Replacing sensor. Lost Advanced Security backup password. Protector Suite QL reinstallation. <Model with Windows XP> Lost “My Safe” backup password. If you need to replace a non-functioning fi ngerprint reader, follow this procedure: Enrollment to the hard disk: If enrollment to hard disk is used, “Protector Suite QL” has not stored any data on the device and therefore has no problem to continue after you replaced the sensor.
  • Page 22 Troubleshooting <Model with Windows Vista> Lost “File Safe” backup password. Accessing “My Safe” * after Protector Suite QL uninstallation. Accessing “My Safe” * after computer crash. “My Safe” * data fi le cannot be backed up using Recover Pro. Removing data from the reader.
  • Page 23 <Only for CF-19 Series with Windows XP Tablet PC Edition> Tablet PC Input Panel is hidden under “Please swipe your fi nger ” message. Starting Over If the specifi c solutions for your problem do not work, you can use these instructions as the last measure and start over.
  • Page 24 D Make sure your fi ngerprint sensor is working. • Use the Tutorial wizard to verify that the fi ngerprint sensor works. If not, reboot and try again. If it still does not work, please contact PANASONIC TECHNICAL SUPPORT. E Restore or create passport.
  • Page 25: Specifi Cations

    Specifi cations Array Size 248 x 4 pixels Image Size 248 x 360 pixels Image Resolution 508 DPI...
  • Page 26 Memo...
  • Page 28 Matsushita Electric Industrial Co., Ltd. Web Site : http://panasonic.net © 2008 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Printed in U.K. UK0108-0 CPE01799ZA...

This manual is also suitable for:

Toughbook cf-18bcagxmmToughbook cf-18bcajxmmToughbook cf-18bcakcmmToughbook cf-18bcakxmmToughbook cf-18bcamxmmToughbook cf-18bcazamm ... Show all

Comments to this Manuals

Symbols: 0
Latest comments: