Panasonic CF-52 Series Reference Manual page 9

Sleep and Hibernation Functions
Entering/Resuming from Sleep or Hibernation
*3
To enter sleep
1
Close the display, or press the power switch (A) until a beep
sounds.
*3
Sleep : The power indicator (B) blinks green.
Hibernation: The power indicator (B) goes off.
You can alternatively use the Windows menu to enter sleep
Click (Start) -
To enter standby, click [start] - [Turn Off Computer] - [Stand By]. To enter hiber-
nation, click [start] - [Turn Off Computer], then press and hold Shift and click
[Hibernate].
CAUTION
While the computer is entering sleep
Do not:
• Touch the keyboard, touch pad or power switch.
• Use an external mouse or other peripheral devices.
• Connect or disconnect the AC adaptor.
• Operate the wireless switch.
• Close or open the display.
• Insert and remove the SD Memory Card.
Wait until the power indicator blinks green (sleep
It may take 1 or 2 minutes to enter sleep
*4
At the beep , immediately release the power switch. After releasing the switch, do not operate it until the power indi-
cator blinks or goes off.
If you press and hold the power switch for longer than 4 seconds, the computer will forcibly shut down and unsaved
data will be lost even if you have set [When I press the power button] to any item in [Change what the power button
does].
If you press and hold the power switch for longer than 4 seconds, the computer will forcibly shut down and unsaved
data will be lost even if you have set any item in [When I press the power button on my computer] (
Sleep or Hibernation").
or hibernation
- [Sleep] / [Hibernate].
*3
or hibernation
*3
*3
or hibernation. Do not touch any key though the screen becomes dark.
*3
or hibernation.
) or goes off (hibernation).
9
*4
page 7 "Setting